COBHAM EXPLORER 7100GX, Installation And User Manual

Page: 49 / 78

General support
98-147366-A Chapter 5: Service 5-3
Servic
e
Event list
When an event is registered, the web interface shows an event icon in the icon bar as
long as the event is active. The ACU display shows also active events. To view the event list
with active events, click the event icon from the icon bar at the top of the web interface, or
select
HELPDESK > Event list
from the left navigation pane.
The
Event list
page shows a detailed list of active events and notifications including the
time of the first occurrence, ID and severity of the event message, and a short text
describing the error. Active events are cleared from the event list when the error is cleared.
They are moved to the section
Notifications and are displayed for 24 hours. All entries in
the section
Notifications
are cleared automatically after 24 hours and after restart of the
system. For a list of all events with description, error code (ID), explanation and remedy see
System messages on page B-1.
Self test
You can start a self test of the EXPLORER 7100GX antenna and ACU.
1. Click Self test in the HELPDESK page.
2. Click the menu item
Self test
.
5.1.3 Reset
To reset the antenna do the following:
1. Press and hold

and

until the ACU display shuts down and the antenna reboots.
2. Wait until the antenna has rebooted and is operational again. The last active satellite
profile will be used.
To reset the GX modem to factory defaults use the web interface. See Reset to factory
default - GX modem on page 4-13.
Reset to factory defaults using the web interface
To reset the EXPLORER 7100GX to factory defaults via the web interface see Reset to
factory default on page 4-12.
Important
Warning! The EXPLORER 7100GX will reboot to perform the self test.
Rebooting will terminate all existing connections.
Important
Warning! Reset to factory default will delete all settings, including
satellite and VSAT modem profiles, network setup, user permissions
and ACU display brightness settings.
Figure 5-2: To reset the system
0DLQ1$9*+0'01(72./$1±
$&48,6,7,212.
6$7:5;/+7;0$5