7
Safety, Compliance and Approvals
1.1 Safe Operating Procedures
•
Ensure that the power supply arrangements are adequate to meet the
stated requirements of the SOL4DCAM transmitter.
•
Operate within the environmental limits specified for the product.
•
Only authorized, trained personnel should open the product. There are
no functions that required the User to gain access to the interior of the
product.
•
The internal battery can not be replaced by customers the unit must be
returned to domo for battery replacement.
1.2 EMC / Safety and Radio Approvals
The equipment has been designed to meet and has been tested against
the following harmonized EMC and safety standards:
•
EN 301 489-1 & EN 301 489-5
•
EN 61000-3-2:2000
•
EN 61000-3-3:1995
•
EN 55022:1998, Class B
•
EN 61000-4-2:1995
•
EN 61000-4-3:1996
•
EN 61000-4-4:1995
•
EN 61000-4-5:1995
•
EN 61000-4-6:1996
•
EN 61000-4-11:1994
•
EN 60950:2000
1.3 CE marking
The CE mark is affixed to all SOLO4 and SOLO2 products, and the CE
Declaration of Conformity, as well as the technical file are available on
request.
