98-165591-B
B-1
Appendix B
BBBB
System messages
B
This appendix has the following sections:
•
•
B.1
Event messages – overview
The EXPLORER 6075LX detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• PAST (Person Activated Self test) – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the EXPLORER 6075LX detects an event that requires your action, it issues an event
message and the red Fail/Pass LED in the LED panel of the Base Unit is lit. As long as an
event is active, it is shown in the Base Unit display and in the web interface (in HELPDESK >
Event list or click the event icon on the DASHBOARD).
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005). This is
supplemental information and used for service and diagnostics purposes.
Note
Your EXPLORER 6075LX will
only show a subset of the listed events
. The
following lists are a total list for a range of EXPLORER 6075LXs (including maritime
terminals) from Cobham SATCOM.
Note
Active events and notifications are shown. As soon as the
event is cleared, it is not displayed any longer. It is then moved
to the Notifications section. Notifications are cleared after 24
hours.
