Local IP and WLAN
98-165591-B
Chapter 4: Setup and operation
4-8
4444
4.3
Local IP and WLAN
4.3.1
To configure the local IP network
On this page you can set up the local IP ports and enter a host name. The host name helps
identifying the VSAT system. To configure the local IP ports, do as follows:
1. Select
SETTINGS > Network.
2. Make the necessary changes on this page and click
Apply
.
For available options for the network configuration, see the table on the next page.
Figure 4-4: Web interface: SETTINGS > Network (example)
CAUTION!
The VSAT system is not designed to be connected directly to
the Internet. It must be located behind a dedicated network security device
such as a firewall. You must change the passwords as anyone with access and
malicious intent can render the system inoperable!
