12
www.cobham.com/patriot
1 Starting with ASSY,3.8M OFFSET C-LEFT PANEL (pt# 238208)
Place the panel into place onto the left-most radial ream as pictured below
Fasten with 1/4x1/2 truss head bolts. Leave bolts 1/2 turn loose at this time.
2 Fasten the next panel as mentioned above. Continue untill all panels have been placed.
(See inset picture for panel placement)
3 Tighten all hardware at this time. See note bellow for tightening procedure(If you must step
into reflector please DO NOT step in center of panels. Keep weight in radial beams ONLY)
NOTE:
Left and right orentation are as you are standing BEHIND the reflector
assembly. The above drawing is pictured as you are standing INFRONT
of the reflector assembly. Left and right designated panels are NOT
interchangeable. All above mentioned hardware can be found in
hardware bag 3HP38011-01
ASSY,3.8M OFFSET C-LEFT PANEL
(pt# 238208)
Panel Install
Tighten first two rows of
hardware on each panel start-
ing here. Then proceed to
next two rows on each panel.
Continue this pattern untill all
screws are tight.