Operation Temp.
-20°C to +65°C
Humidity
5%--95% non-condensing
6. Operating Instructions
6.1 Terminal Installation
6.1.1
Please ask the qualified engineers to install it.
6.1.2 Do not install it in an environment which is over GSM performance index, and
please pay attention to fix the antennas in an appropriate position with good signals.
6.1.3 Pay attention to make installation location preventing water and dust.
6.1.4
Find the 10 PIN harness and insert it into the corresponding holes of the products,
and connect the wires with the original car circuit showing below:
Wiring diagram
Note: The orange wire can be connected to the original car horn; it can also be
connected to the siren you buy with the tracker. (Siren is Option)
6.1.5 Knowing about the type of the door trigger is positive or negative trigger. Please
connect the green wire to the door control circuit if it is positive, and connect blue
WWW.SYRED.MX
