6.31 Check IMEI
Send SMS command "imei+password" to the device. E.g: Send SMS command
"imei123456" to the tracker device, it will reply an IMEI number in 15 digits to
your cell phone.
6.32 Terminal (local) Time Setting
6.32.1 Send SMS command “time+space+zone+pspace+time” to the device,
If succeed, it will reply “time OK”
6.32.2 For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your
country time zone is minus, send SMS “time zone123456 -8”.
6.33 Reset Hardware
Send SMS “reset+password” to tracker device to reset the GSM module and
GPS module of the tracker device, it will reply “reset ok”.
6.34 Configure parameters by USB
Connect tracker to computer with the optional USB cable, open the memory
of the tracker, find and open the initial configuration file with
notepad
, operate according the instructions.
Note: Correct password is needed every time you configure the tracker.
6.35 GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS.
6.35.1 Configure APN
APN standards for Access Point Name and differs from country to country. For more
information about your local APN, please inquire with your local GPRS network
operator.
Send a SMS command to tracker “APN+pa Space + your local APN” via a
cell phone and if succeeded, the tracker will reply “APN OK”.
For example: Send SMS command “APN123456 CMNET”. If succeeded, the tracker
will reply “APN OK”.
WWW.SYRED.MX
