11
mode.
6.15.
Data logging
6.15.1
Auto logging
：
When the tracker device lost GSM signals or fall offline from GPRS, tracker will
log the tracking position and alerts automatically in the SD card on the basis of the pre-set condition,
when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or web
platform (server), but the logged tracking data should be loaded to the web platform via SMS
command.
6.15.2
Logging upon times: Send SMS: “save0password” to the tracker unit, it will reply
“save ok”, and will log the Latitude and longitude locations every 30 seconds for 5 times. (S: second,
m: minute; h: hour).
6.15.3
Multi-logging
：
Send SMS:”save030s***n+password” to tracker device, it will reply “save ok”.
6.15.4
Cancel logging: Send SMS “password”, e.g. nosave123456
6.15.5
Logging Clearance: send SMS: “clear+password” to tracker device, it will reply “clear ok”.
6.15.6
Logging V
olume: 1.7 G internal memory and can be expanded by using microSD card.
Note: It won’t save in GPRS mode if configured auto track intervals because it will track according
to the intervals in real time, data will be saved in other situation, and the saved data will be sent to
server automatically when GPRS back.
6.16.
Data Load
The positions during the time of GSM signal lost will be sent to server automatically when GSM
signals recover.
6.17.
Forward the third parties’ message
6.17.1
Send SMS "pspace+third parties phone number" from authorized phone
number, tracker will reply"forward ok", and supports 1 third parties phone numbers at most.
For example, set the phone number of the service provider of the SIM card in the tracker, when
charge remind message coming in, tracker will forward it to authorized phone number.
6.17.2
Cancel: Send SMS command "nopassword".
6.18.
SIM card Balance Inquiry
Send SMS command "pspace+carrier’s phone space+code" to tracker, it
will forward the code to carrier’s phone number and return the balance message received from
carrier’s phone number
How it works: After accept balance command, tracker will remember the “mobile phone number”,
carrier’s phone number and the code;
