Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
R30 Owner’s Manual
5
-
7
I
NTERIOR
/E
XTERIOR
C
ARE
STAINLESS STEEL AND
CHROME
Stainless steel, though highly resistant, is still
capable of rusting, particularly in the marine
environment. Initial signs of rust and corrosion, left
untreated, may result in pitting and permanent
damage to components. Keep your stainless steel
looking new by cleaning monthly with a good
quality stainless steel cleaner or polish. Always
clean and polish in the direction of the grain and
finish.
The following steps will help protect against such
occurrences:
Preventive Steps
Clean and wax metal brightwork prior to extended
storage. In saltwater or other harsh environments,
repeat more often as needed. High-quality
stainless steel cleaners and conditioners are
commercially available. Rinse with fresh water and
wipe dry with towel or chamois after each use.
Cleaning Stainless Steel
Remove rust or corrosion promptly using a good
metal cleaner/polish. Delay may contribute to
permanent finish damage. Do not use steel wool or
other coarse abrasives, or clean with acids or
bleach. DO NOT use cleaners that are not for use
on stainless steel, such as glass, tile or counter
cleaners, or citrus-based cleaners. These types of
cleaners can damage the surface permanently.
Apply metal or automotive wax after cleaning for
additional protection. Always test any product in an
inconspicuous area before applying to the complete
surface.
Should you have reason to replace hardware or
fasteners, be certain that replacements are correct
materials. See your authorized Cobalt dealer for
further information.
CORROSION PROTECTION
CorrosionX
One of the issues associated with owning a boat is
corrosion, which, ironically, is often caused directly
by the marine environment. If you operate a boat in
saltwater, you will be surprised by the excessive
corrosion in just a few weeks. Since we recognize
that your purchase of a Cobalt boat was a major
financial decision, we want you to be happy with
your choice for years to come. After consulting with
our dealers and operators throughout the country,
we found that regular applications of a product
called CorrosionX will keep your boat operating at
peak efficiency, free of corrosion. To assist you, we
have included a small can of CorrosionX in the
optional saltwater kit. Minimally, it should be applied
to the following areas and components in the time
frames specified:
Topside
Spray or wipe a light coat of CorrosionX on all rails,
stanchions, cleats, cleat bolts and other metal
fixtures/fittings up on deck. Treat hinges, locks,
closure mechanisms and sliding tracks of doors
and windows. If sprayed on, wipe with cloth to
remove excess. A very light coat is all it takes and it
should be applied every two months if operating in
saltwater and every four months in freshwater
operations.
A
DANGER
Avoid fire, explosion or exposure to
toxic materials. Some of these solvents
are highly flammable and toxic. Exercise
proper care in cleaning, wear protective
gear and provide adequate ventilation.
DO NOT store soiled rags onboard;
store or dispose of rags properly
ashore.
CAUTION
Use caution in cleaning around
stitching, wood or other decorative trim,
since these solvents could seriously
damage these materials.
