Cobalt Digital Inc CS22, Owner'S Manual

Page: 96 / 132

3
-
36 CS22 Owner’s Manual
COBALT
CS22
BOWRIDER
S
ECTION
3
ELECTRIC ECLIPSE ARCH
WITH BIMINI
1. To raise and lower, turn on the master switch in
the helm area, and raise and lower with the
switch located in the aft walk-thru area.
2. Fold aft bimini bow toward the back of the boat.
3. Remove canvas boot.
4. Unfold canvas and deploy over the top of the
arch, and put the hole in the canvas over the
anchor light on top.
5. Move forward bimini bow to top quick release
position, and attach the short bimini poles to the
forward bow and quick release.
6. Unzip forward bow support pocket on the
canvas and put over forward bimini bow and
rezip canvas.
7. Pull the aft end of bimini down tight using
adjustable poles to hold tight.
SKI TOW EYE/PYLON
The stainless steel ski tow and stainless steel ski
tow pylon are designed for a single skier only. The
ski tow pylon may be located at the stern of the
boat or on the ski tower.
TRANSOM TILT SWITCH -
OPTIONAL
The remote transom tilt switch allows you to raise
or lower the drive unit from the stern. The remote tilt
switch is connected directly to the battery switch
and does not require the ignition key to be on. If
your boat has twin engines, each drive unit will
have a switch.
NOTICE: Do not operate
equipment that has loose or
missing fasteners. Be sure all
fasteners are installed and
properly tightened before
operating equipment.
A
WARNING
Avoid injury or death. DO NOT overload
the ski tow, ski tow eye or the ski tow
pylon, or use them for anything other
than water sports. The ski tow eye and
the ski tow pylon maximum load is 1,000
lbs (454 kg).
COB_0245_A
!
WARNING
Keep hands
and feet
away from
drive unit
when tilting
COB_0151