BBG1002UDX-OM (V1.5)
BBG-1002-UDX PRODUCT MANUAL
3-83
Setup/Operating Instructions
Troubleshooting
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the BBG-1002-UDX and its remote control
interface. The BBG-1002-UDX requires no periodic maintenance in its
normal operation; if any error indication (as described in this section) occurs,
use this section to correct the condition.
Error and Failure Indicator Overview
The BBG-1002-UDX itself and its remote control provide error and failure
indications. Depending on how the BBG-1002-UDX is being used (i.e,
standalone or network controlled through DashBoard™ or a Remote Control
Panel), check all available indications in the event of an error or failure
condition.
The various BBG-1002-UDX device and remote control error and failure
indicators are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
