Cobalt Digital Inc A40, Owner'S Manual

Page: 102 / 136

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3-46 A40 Owner’s Manual
COBALT
A40
DAY CRUISER
S
ECTION
3
Tie down locations are for keeping your Cobalt boat
secured when moored. Refer to
Section 3 ,
Anchoring .
ENGINE HATCH ASSEMBLY
The electric engine hatch assembly is controlled by
the
HATCH / HATCH switch behind the galley
door.
Do not operate the engine hatch assembly with any
obstructions that will interfere with its operation,
including canvas disconnect stern curtain, removal
of side flaps and transom door locked in the open
position. Damage to the engine hatch, hinges and
lifting unit can result. Before opening the engine
hatch, make sure no items are on top of it and any
cushions, inserts or stored equipment are secure or
removed. Wind and other conditions may allow the
engine hatch to open beyond its limits. Use caution
during these conditions.
A
WARNING
Avoid injury, death or property damage.
Never anchor a boat from the stern, and
keep the boat headed into the waves.
NOTICE: Only use properly
positioned slings to lift your
boat.
A
DANGER
To avoid injury or death, do not occupy
or operate the engine(s) when the
engine hatch is open. The engine hatch
assembly is a machinery guard. Use
safety prop rod located on the bottom
side of the engine hatch.