Cobalt Digital Inc A28, Owner'S Manual

Page: 129 / 140

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
A28 Owner’s Manual 6
-
9
M
AINTENANCE AND
T
ROUBLESHOOTING
Electrical
Plumbing
CAUTION
Correct a problem with the electrical
system before resetting a circuit
breaker. If the breaker continues to trip,
see your authorized Cobalt dealer.
Symptom Possible Cause
Electrical component
will not function Circuit breaker tripped or in the OFF position – correct the problem and reset; turn circuit
breaker on.
Dim or no lights Circuit breaker tripped or in the OFF position – correct the problem and reset; turn circuit
breaker on.
Battery discharged – charge battery.
Generator will not start Battery switch in the OFF position – turn switch to the ON position.
Engine problem – see your authorized Cobalt dealer.
No AC power Circuit breakers tripped or in the OFF position – correct the problem and reset the shore
power inlet breaker or the breaker on the cabin distribution panel.
Make sure shore/generator selector switch is positioned correctly.
Ground fault circuit interrupter tripped – reset button on the outlet and test. If problem
exists – see your authorized Cobalt dealer.
Symptom Possible Cause
No water at sink Freshwater pump circuit breaker tripped or in the OFF position – correct the problem and
reset; turn circuit breaker on.
Freshwater tank empty.
Freshwater pump defective – see your authorized Cobalt dealer.
Filter plugged – clean filter located at the tank under mid-berth.
Low water pressure at
sink Damaged freshwater pump, restriction or obstruction in water line – see your authorized
Cobalt dealer.
Head will not flush Head circuit breaker tripped or in OFF position – correct the problem and reset; turn circuit
breaker ON.
Line to waste tank blocked – see your authorized Cobalt dealer.