manualshive.com logo in svg

Cobalt Digital Inc 9902-DC-4K, Product Manual

Share
Download
Cobalt Digital Inc 9902-DC-4K Product Manual Download Page 45

9902DC4K-OM (V1.5)

9902-DC-4K PRODUCT MANUAL

3-21

Setup Instructions

9902-DC-4K Function Menu List and Descriptions

(continued)

• HD ATC_VITC Insertion Control

For HD output, enables or disables ATC_VITC timecode insertion into the 
output video, and selects the line number for ATC_VITC1 and 
ATC_VITC2.

• ATC_VITC Legacy Support Control

When enabled, accommodates equipment requiring ATC_VITC packet in 
both fields as a “field 1” packet (non-toggling).
Note: Non-toggling VITC1 and VITC2 packets do not conform to 

SMPTE 12M-2-2008 preferences. As such, ATC_VITC Legacy 
Support should be enabled only if required by downstream 
equipment.

• Free Run Timecode Controls

Allows an initial (starting) count to be applied to output video timecode 
when Free Run insertion is enabled.

Note: • Initialization can only be applied when card is outputting Free Run 

timecode (as shown by Output Status displaying “Free Run”). 

• If failover to Free Run occurs due to loss of external timecode(s), 

the Free Run count assumes its initial count from the last valid 
externally supplied count.

Table 3-1

9902-DC-4K Function Menu List — continued

Summary of Contents for 9902-DC-4K































































Reviews:

No comments

Brands by name

Popular brands

Load more brands