Cobalt Digital Inc 3G Fusion 9931-DE Product Manual Download Page 53 | Manualshive

Page: 53 / 124

background image

9931-EMDE-OM (V1.17)

9931-EMDE PRODUCT MANUAL

3-1

Chapter 3

Chapter 3

Operating Instructions

Overview

This chapter contains the following information:

•

Control and Display Descriptions (p. 3-1)

•

Accessing the 9931-EMDE Card via Remote Control (p. 3-6)

•

Checking Card Information (p. 3-8)

•

Ancillary Data Line Number Locations and Ranges (p. 3-9)

•

9931-EMDE Function Menu List and Descriptions (p. 3-10)

•

Troubleshooting (p. 3-62)

Control and Display Descriptions

Note:

When you are familiar with the card functions and controls described in this
chapter, please go to the Support>Documents>Reference Guides link at
www.cobaltdigital.com for Fusion3G

®

application notes covering comprehen-

sive setup of practical processing applications.

This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the 9931-EMDE card. The
9931-EMDE functions can be accessed and controlled using any of the user
interfaces described here.

The format in which the 9931-EMDE functional controls, indicators, and
displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the 9931-EMDE
functions (and the controls, indicators, and displays related to a particular
function) follows a general arrangement of Function Menus under which
related controls can be accessed (as described in Function Menu/Parameter
Menu Overview below).

After familiarizing yourself with the arrangement described in Function
Menu/Parameter Menu Overview, proceed to the subsection for the particular
user interface being used. Descriptions and general instructions for using each
user interface are individually described in the following subsections:

If you are already familiar with

using DashBoard or a Cobalt

Remote Control Panel to control

Cobalt cards, please skip to

9931-EMDE Function Menu List

and Descriptions (p. 3-10).

«
...
51
52
53
54
55
...
»

Summary of Contents for 3G Fusion 9931-DE





























































































































Reviews:

No comments

Related manuals for 3G Fusion 9931-DE

Brand: Stanwax Laser Pages: 9

Brand: Direct IP Pages: 76

Brand: Xilica Audio Design Pages: 30

Brand: Avolites Pages: 24

Brand: ESD Pages: 28

Brand: FDI Pages: 2

Brand: Meinberg Pages: 14

Brand: Navitar Pages: 1

Brand: Xilinx Pages: 29

Brand: Net Optics Pages: 2

Brand: Honeywell Pages: 74

Brand: Keysight Technologies Pages: 44

Brand: Keysight Pages: 46

Brand: Arduino Pages: 18

Brand: F5 Pages: 68

Brand: YASKAWA Pages: 2

Compumotor AT6200

Brand: Parker Pages: 45

Brand: Texas Instruments Pages: 167

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands