Cobalt Digital Inc 303, Owner'S Manual

Page: 111 / 136

Cobalt_OM_preprint_shell.fm Page 1 Wednesday, March 1, 2006 5:39 AM
303 Owner’s Manual 4
-
15
S
YSTEMS
BATTERY CONNECTIONS
Loose battery connections can cause errant signals
to the boat’s electrical system.
Read and understand the safety information on or
supplied with your battery(ies). Maintain the
battery(ies) following the manufacturer’s
recommendations.
JUMP START STUDS
This receptacle (1) allows for jump-starting an
engine. The receptacles have protective covers and
must stay in place when receptacles are not being
used. The covers identify the + positive (red) and
the - negative (black). The studs can be used to
raise the engine compartment when the batteries
are low or removed.
The jump start studs are located near or on the
battery switch panel.
Battery Breaker Panel
These breakers protect the features as labeled.
Your Cobalt boat may include more or fewer
features than shown.
1 – Receptacle
A
WARNING
Avoid the potential of explosion from
shorting or arching. Keep the battery
connections tight and clean, the
terminal covers in place and the
battery(ies) secure in the restraint
system.
COB_0090_A
NOTICE: Do not start an engine
from the jump start studs
without the batteries connected
to the boat’s charging system.
Damage to engine and charging
system will result.
CAUTION
Correct a problem with the electrical
system before resetting a circuit
breaker. If the breaker continues to trip,
see your authorized Cobalt dealer.
BLIGE PUMP HELM
CAPT. CALL CAPT. CALL
CABIN BATTERY CHARGER BATTERY CHARGER
BATTERY CHARGER
MERCATHODE
ELECTRONIC S HIFT ELECTRONIC S HIFT
COB_0247_A
1