CL64WLAN
User Manual
V001
15 of 44
This page will show the Wi-Fi Status and the Devices connected:
•
Wi-Fi Status: it shows the following parameters related to the Wi-Fi network:
◦
SSID1: It is the Service Set Identifier (SSID) of the access point.
◦
MAC: MAC address of the slave.
◦
Encryption method: The encryption method used for the WiFi connection.
◦
Rate: Transmission rate in Mbps
◦
Model
◦
Channel: It is the wireless channel used by the slave WiFi interface.
◦
Signal: level of the signal received in dBm.
◦
Noise: level of noise received in dBm.
◦
Transmission power: power used by the
CL64WLAN
to transmit in dBm.
•
Device connected: it shows a table of the devices connected to the WiFi network
with the following information of each device:
◦
ID: a number to identify a device connected to the WiFi network.
◦
MAC address: MAC address of this device.
◦
Signal/Noise: signal-noise ratio received from this device.
◦
accept rate: data rate received from this device.
◦
send rate: data rate sent to this device from the slave unit.
The Refresh button updates the information shown in this page. The Restart Wi-Fi button
allows to restart the WiFi interface of the slave.
Picture
5
Summary of Contents for CL64WLAN
Page 1: ...coaxLAN Modem CL64WLAN ...