Page 4 of 6
ITEM:900374N
ASSEMBLY INSTRUCTION
www.coastercompany.com
PARTS IDENTIFICATION
PARTS IDENTIFICATION
J:
INSERT
SUPPORT
BAR
I:
CENTER
BACK
BAR
STEP 1
Locate the Left Side Cabinet (B), Right Side
Cabinet (C), Center Front Panel (D), and set out
face down on a scratch-free surface.
Insert one Wood Dowel (3) into each of the
pre-drilled holes.
Push the Left Side Cabinet (B) and Right Side
Cabinet (C) snug to the Center Front Panel (D).
Make sure the Wood Dowels (3) are seated in
the pre-drilled holes.
Connect the Left Side Cabinet (B), Right Side
Cabinet (C) and Center Front Panel (D) with
connection plate, tighten Screws (5) through the
pre-drilled holes.
STEP 2
Locate Base (A) and set out
fi
nished side up on the
fl
oor.
Insert one Wood Dowel (3) into each of the
pre-drilled holes.
Attach the Completed assembly from step 3 to
the Base (A). Make sure that dowels are
seated into the pre-drilled holes in the Base.
Using Bolts (1) and Washers (2) attach panels
through pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
1PC
1PC
1PC
1PC
G: LEFT UPPER
SIDE PANEL
H: RIGHT UPPER
SIDE PANEL
5
C
B
3
3
1
1
2
2
A
3
3
