ASSEMBLY INSTRUCTIONS
STRANGULATION HAZARD:
REPLACEMENT PARTS
SIZE OF MATTRESS
The length and width of the bunk mattress are as follow:
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress
sleeping surface to top edge of guardrail.
1.
Follow the information on the warnings appearing on the upper bunk end structure and
on the carton. Do not remove the warning label from bed.
2.
Always use the recommended size mattress or mattress support or both to help prevent
the likelihood of entrapment or falls.
3.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4.
Do not allow children under 6 years of age to use the upper bunk.
5.
Prohibit more than one person on upper bunk.
6.
Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
7.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.
Always use the ladder for entering and leaving the upper bunk.
9.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10.
Use of a night light may provide added safety precaution for a child using upper bunk.
11.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and wall.
12.
The use of water or sleep flotation mattress is prohibited.
13.
Keep these instructions for future reference.
14.
Never attach or hang items to any part of the bunk bed that are not designed for use with
the bed for example, but not limited to hooks, belts, and jump ropes.
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
Upper bunk
Lower Bunk
SAFETY WARNING
Length
Width
Thickness
74” -75”
74” -75”
37 1/2”- 38 1/2”
6” Maximum
6” Maximum
PAGE 6 OF 7
37 1/2”- 38 1/2”
