HARDWARE IDENTIFICATION
A
DRESSER
1SET
1
SHORT SCREW
1PC
2
LONG SCREW
1PC
3
CABLE TIE
1PC
4
L BRACKET
2PCS
STEP 1
STEP 2
PARTS IDENTIFICATION
ANTI-TIPPING KIT
STEP 3
www.coastercompany.com
PAGE 3 OF 3
Attach a L-bracket securely to the back top rail of
the dresser using short screw provided, through the
smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of dresser. Attached to
the wall stud using the long screw
through the smaller hole.
Place the dresser into position so both L-brackets are vertically in line. Insert the end of the cable tie
through the larger hole in each L-bracket. Bring both ends together and slide the flat end through the
locking end and pull until tight.
