22) Once the tower is standing leave the crane attached and attach the guy wire
cables to the lifting eyes. Each cable will have its own "D" shackle, Thimble,
Rope Clamp (x2) and Turnbuckle.
23) Use a high reach or cherry picker to remove the crane from the Pull Up bracket.
24) Install the red base covers.
25) Install the Striker, Skill Select and Permanent power.
26) Power Game up and spray the PCBs and into the power supplies with the
moisture displacer supplied.
27) Run a bead of silicone around the base and tower section. This is another critical
weatherproofing step.
Tools Needed for Hi-Striker X-Treme
•
7/8" open/box end wrench (Tower/Base Hardware)
•
3/4" open/box end wrench (Skill Select Mounting Hardware)
•
9/16" open/box end wrench (Guy wire Bracket Hardware)
•
7/16" open/box end wrench (PCB Enclosure)
•
3/8" drive ratchet
•
7/8" socket (Pocket Top Sign Bolts)
•
3/4" socket (Packing hardware)
•
9/16" socket (Guy wire hardware)
•
1/2" socket (New Style Park Guy wire Clamp)
•
1/8" Allen Wrench / Bit (Top Sign Back Cover)
•
Large Crescent Wrench (Base & Striker Mounting, Turnbuckle nuts)
Other Items (suggested)
•
Cordless Drill w/ spare batteries (Unpacking)
•
Magnetic bit holder and Phillips tip (Unpacking)
•
Wire Cutters (Zip Ties/Wires)
•
Standard Blade Screwdriver
•
Phillips Screwdriver
•
Small Slip Joint Pliers
•
Utility Knife
