Important: Always read and follow operating instructions.
• 19
Upper Bead Mounting
Keep the mounting arm and the mounting tool in working position and proceed with mounting of the upper
bead, then put the tire bead on the rim slightly tilted down to
“3 o’clock”
position, so that the upper bead rests
on the left side and under the right side of the mounting tool (fig. 1).
Bead correctly positioned over the left side of the
mounting tool and under it on its right side.
Bead correctly positioned over the left side of the
mounting tool and under it on its right side, thus it
can be slightly lowered for easy tire mounting.
Press the pedal
2
to rotate the wheel clockwise, contemporarily press the tire manually from
“5 o’clock”
position to force the upper bead at drop-centre position. Keep it pressed while rotating up to
“8 o’clock”
position
to complete the upper bead mounting (fig. 2).
It is advisable to use the pneumatic bead pressing arm (fig.2) for standard tires that are particularly difficult to
bead loosen. (fig. 3).
Press the buttons (fig. 4) to use using the bead pressing tool to push on the tire bead at
“5 o’clock”
position,
press pedal
2
and rotate the tire until it is completely mounted. Once the bead has been mounted, the bead
pressing tool will automatically return to the rest position.
Ensure that the Rim and Tire always spin together.