background image

Page 2 of 3 

WARRANTY LIMITATIONS 

6.1 

The  Supplier  makes  no  warranties  or  representations  other  than  those  set  out  in  this  warranty  document 
except as is required by law.  

6.2 

The Supplier will not be liable under this warranty:-  

(i) 

to  the  Client  or  any  other  person  for  any  consequential,  direct  or  indirect  loss,  damage  or  costs 
incurred or suffered by the Client or any other person, including but not limited to damage to persons, 
other property, loss of turnover, loss of profits, loss of business or goodwill;  

(ii) 

to the Client for transportation or travel costs which are the Client's responsibility; 

(iii) 

for damage or defects in any Goods caused by improper transportation, storage or any other misuse, 
neglect or accident.  

(iv) 

for  the  installation  of  the  Goods.  Any  fault  or  defect  due  to  installation  should  be  referred  to  the 
installer.  The  Goods  must  be  installed  in  accordance  with  the  Manufacturer’s  instructions  and  any 
relevant legislation or code. 

6.3 

This warranty covers the Client only and it is not transferrable if the Goods are sold by the Client during the 
warranty period. 

WARRANTY EXCLUSIONS 

7.1 

This warranty will not apply where:  

(i) 

the  Goods  have  been  improperly  modified  or  repaired  or  the  Good's  defect  has  arisen  due  to  the 
Client's  failure  to  properly  install,  fit,  maintain,  service  or  use  the  Goods  in  accordance  with  the 
specifications  and  instructions  provided  by  the  Manufacturer,  including  a  failure  to  comply  with  the 
relevant maintenance schedule (where applicable); 

(ii) 

the Supplier cannot establish any Defect in the Goods after testing;  

(iii) 

the Goods have been used other than for the purpose for which they were designed;  

(iv) 

the  Goods  have  been  subject  to  abnormal  conditions,  including  but  not  limited  to  temperature, 
pressure, stress, load or similar;  

(v) 

the  Client  or  installer  have  used  or  fitted  non-genuine  or  non-approved  parts  and  accessories  to  the 
Goods or have failed to use recommended parts and accessories;  

(vi) 

the Good's defect has arisen due to abuse, misuse, neglect or accident; 

(vii) 

the Goods have not been installed in accordance with the relevant instructions;  

(viii) 

the Good’s defect is caused by use or fair wear and tear of the Goods (or expendable parts). 

RIGHTS AT LAW 

8.1 

The benefits given to the Client under this warranty are in addition to other rights and remedies of the Client 
at law in relation to the Goods.  

8.2 

Our  Goods  come  with  guarantees  that  cannot  be  excluded  under  the  Australian  Consumer  Law.    You  are 
entitled  to  a  replacement  or  refund  for  a  major  failure  and  for  compensation  for  any  other  reasonably 
foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the Goods fail to 
be of acceptable quality and the failure does not amount to a major failure.  

 

Summary of Contents for WF2AU1B
















Reviews: