6
6
、
、
、
、
Operation introduction
6-1
、
、
、
、
Lottery-installing introduction.
A.
Open the lottery door by the key
B.
Put the lotteries in the lottery box with face upside.
C.
Put the lottery in leading slot, and drive it below the holding wheel.
D.
Press the jiggle switch in the lottery machine’s PCB by hand, until the first lottery is
sent out.
E.
Lock the lottery door.
F.
Notice
1.The lotteries should not be superposed when putting in the
leading groove.
2.The lotteries should be set along the ticket-out direction
The eclectic wire should not be enwind or contacted with the lotteries
（
（
（
（
Picture One
）
）
）
）
Operation introduction:
When inserting the lotteries, please press the jiggle switch on the PCB( or dial the
driver switch), the lotteries entry will be loosen state. Now, insert the lotteries into the
leading slot, and lead it to the holding wheel, until the first lottery is out.
常开
常开
常开
常开
常闭
常闭
常闭
常闭
Lottery leading slot
Gear
Lottery entry
High and low drive
high drive
Low drive
Signal feedback switch
on
off
Front
panel
Circuit
Board
Summary of Contents for Lucky Zone
Page 2: ......
