Item number: - 59401, 59402 26.07.13
Page 2 of
3
Step 1- Lay the Table top panel (A) upside down on to a clean smooth surface. Take legs assembly (B) and match it with its
respective side
.
The slots on the Top and legs are numbered. Match the number on the leg assembly with that on the Top, while
attaching.
Insert Allen Bolt (D) with washer (F) & spring washer (G) & Loosely Tighten with Allen Key (H).
Step 2- Now align the bottom Stretcher (C) with legs (B) as shown. Insert the stretcher tenon in the front leg’s slot.
Step 3- Insert Allen Bolt (E) & in back legs & loosely Tighten with Allen Key (I).
Step 4 - Now fully tighten all Allen Bolts (D) & (E) with Allen Key (H) & (I).
Step 5 - With help flip the Table upright.
