Coachman Travelmaster 2022, User Manual

Page: 87 / 112

4-41
C22M-1
A
B
C
EN
Descriptions
Page
LIGHTS
When changing a light bulb, the new bulb must be of the
same type and strength as the original.
Coachman predominantly uses LED bulbs. This reduces
the power consumption of lights (i.e. the battery lasts
longer compared to when using other bulbs). LED bulbs
have a far longer life than traditional incandescent bulbs.
Some LED bulbs have the same base as traditional halo-
gen bulbs. However, LED lights should still be chosen to
limit power consumption and to avoid unwanted heat in
the bulb.
LED bulbs of the same type can shine with different hues.
Incandescent bulbs and LED bulbs are regarded as peris-
hable.
WARNING!
Risk of burns!
Lit halogen bulbs get hot. Fitting a
halogen bulb instead of a low-energy
bulb can cause overheating.
Descriptions – Electrical system
OUTSIDE LIGHT
Switch on the outside light via the control panel (A). The
outside light is permanently on.
If the motorhome has motion sensors, icons (B) and (C)
are shown on the control panel.
Activate the motion sensor by pressing the control panel
(B). The outside light goes out after a few minutes. It
comes back on if, in the dark, the motion sensor detects
motion.
If button (C) is activated, some lights inside the vehicle
follow the outside lights and are activated by the motion
sensor.
The purpose is to make people inside the vehicle aware
that the motion detector has detected motion outside the
vehicle.
Switch the button (C) off if you would like the motion
sensor to activate the outside lighting without disturbing
inside the vehicle.