8
H a r d w a r e I n s t a l l a t i o n
Tempo Go
Hardware Installation
This section outlines how to connect and power your Tempo Go system.
Caution:
When connecting, all volume controls should be turned down to prevent possible equipment damage;
then, adjust to the desired level after the inputs/outputs are connected.
Tempo Control Unit I/O Connection Panel
This section outlines the I/O connection panel to utilize your Tempo Go Control Unit.
1.
Mic:
Microphone-level input (female)
2.
Tempest FX (Stage):
FX audio input from Tempest FX Voice Announce output (female)
Tempest FX LAN:
FX network Ethernet connection
3.
MP3 Player Port:
Connection for 1/8 in. auxiliary cable
4.
USB Ports:
Used to connect the Tempo Remote and USB flash drives (to load the Tempo script).
5.
Output to speaker units (Left, Center, Right):
Audio 6-pin connections to speaker units (male)
6.
Power Connection
: Power input for the Control Unit
Figure 12: Control Unit I/O Connection Panel
