background image

1.

Product 

Overview

The 

IAQ MAX

 

CO2 Monitor and Data Logger is designed to 

detect ambient Carbon 

D

ioxide (CO2),Temperature

 

(TEMP)

, Humidity

 (HUM) and Barometric Pressure 

(BARO) by enhanced sensing technologies and precise 

monitoring; all from a sleek, modern, digital LCD display.

2.

Device Features

-

Large, easy to read LCD display with 

CO2 

3-color

 

code

indicator 

for 

GOOD

OK

, or 

POOR

 air quality

 

levels

 

in real

time

-

NDIR CO2 sensor for fast, accurate 

measurements

-

Visual

 a

larm 

indication

-

Built-in data log

 display table 

and

 downloadable

 

software

-

Fresh air calibration

-

Powered by USB or Rechargeable Lithium-Ion

 

batteries

-

Clean, Modern Desktop Design

3. Considerations

Please read the instructions carefully before using this 

device.

Avoid covering the air intake areas located on the back of 

the device during use, to avoid inaccurate measurements. 

(See page 5 - #4)

Please keep the manual handy for quick reference and 

troubleshooting, or visit 

www.co2meter.com

 for easy 

manual

 and documentation

 download.

3

 

Summary of Contents for IAQ MAX














Reviews: