9
EN
G
LI
S
H
Care and maintenance
- Always keep the motor’s ventilation openings free of dust and debris.
- Clean the machine as needed using a lightly moistened cloth and mild
detergent if necessary. Avoid using solvents and abrasive cleaning agents.
Troubleshooting guide
Problem
Possible cause
Possible solution
The machine
does not start
1. No power
2. Short circuit
3. Faulty power switch
1. Recharge the battery
2. Contact our Customer Service
Dept in case of motor or
electrical faults
3. Contact our Customer Service
Dept in case of motor or
electrical faults
The machine
runs slowly
1. Worn/damaged cutter/bit
2. Speed too low
3. The motor is overheated
1. Sharpen or change the tool
2. Alter the variable setting
3. Do not press down too hard
Strange noise 1. Mechanical fault
2. Faulty windings
1. Contact our Customer Services
2. Contact our Customer Services
Heavy
vibration
1. Loose cutter/bit
1. Tighten the tool and make sure
it is set correctly
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to
dispose of this product, please contact your municipality.
Specifications
Battery
9.6 V, NiMH, 700 mAh
Charge time
3 hours
Operating time
30 minutes
No-Load Speed
5000 – 20000 rpm
Collet Size
3.2 mm
Weight
0.4 kg
Lpa (sound pressure level) 63 dB(A)
Uncertainty factor K
3 dB
Lwa (sound power level)
74 dB(A)
Uncertainty factor K
3 dB
Vibration value
2.02 m/s²
Uncertainty factor K
1.5 m/s²
Summary of Contents for S1J-XT8
Page 2: ......