5
EN
GL
IS
H
Mounting
1. Before mounting check that no parts have been damaged during transport.
2. Unfold the tripod legs (9) by pushing down the spring of the locking device (8)
downwards. Set the tripod legs in desired position.
3. Place the tripod on a solid surface where it cannot tilt.
4. Unscrew the housing screw (2) and open the light. Insert the tube light 500 W
(R7s, 118 mm) and lock the housing screw again.
5. Open the screw knob (5) and attach the light to the tripod. Lock the screw knob
carefully.
6. Adjust the height of the tripod by unscrewing the locking nuts (7) and lock after
desired height is set.
7. Connect the plug (11) to a wall socket.
Specifications
Article
18-2160 / 36-3814
Type No.
ECLC-HALO-0206D
Voltage
220–240 V AC, 50 Hz
Light source
Max 1 × 500 W, R7s, 118 mm
Cord
2.5 m rubber cable H05RN-F 3 × 1.0 mm
2
IP class
IP44 for indoor and outdoor
