14
EN
G
LI
S
H
Spindle Lock Button
6. Changing of grinding wheel
The grinding wheel must have the correct inner diameter. Never use loose sleeves.
It should be approved for at least 8500 rpm.
1. Pull out the plug from the outlet before changing the grinding disc.
2. Activate the spindle loc. Loosen the spindle bolt from the outer flange of the
spindle.
3. Remove the old grinding disc and attach a new one.
4. Assemble in reversed order.
5. Start the machine and let it run for awhile to make sure the disc is balanced
before grinding.
7. Rotating the rear handle
1. Unplug the mains lead before rotating the handle.
2. Push in the locking button to rotate the handle.
3. Rotate the handle to one of the three set positions.
4. Release the locking button and make sure the handle clicks in position.
Locking buttton
