12
EN
G
LI
S
H
4. Assembly
1. Screw the side handle on the side of the gearbox that fits best. Insert the rubber
plugs in the holes that are not used. Three different kinds of assembly are
possible.
2. Place the inner unthreaded flange (C) on the spindle and twist it until it locks on
the spindle.
3. Put on a grinding/cutting disc (D) on the spindle so it centres.
4. Put on the outer flange (E) with the concave side towards the disc.
5. Push in the spindle lock and tighten the flange clockwise with the included key.
6. Start the machine and let it run for awhile to make sure the disc is balanced
before grinding.
B
C
D
E
F
