7
EN
G
LIS
H
Troubleshooting
Problem
Possible cause
Correction
The floodlight is not activated
by movement within
the detection zone.
No mains voltage, blown fuse,
switch set to off.
Check the connections,
fuses, switch.
The environment is too bright.
Redirect the sensor, or move
the sensor itself.
Incorrect positioning.
Redirect the sensor.
The floodlight comes on for
no reason.
Heat sources, other lighting or
car headlights are activating
the sensor.
Redirect the sensor away
from interfering light sources.
Wild animals/birds, pets
activating the sensor.
Redirect the sensor.
Reflections from a swimming
pool or other reflecting surface.
Redirect the sensor.
The floodlight does not
turn off.
Continuous false triggering.
Redirect the sensor.
The [ TIME ] setting is incorrect.
Reduce the time setting.
The floodlight comes on
during the day.
The [ LUX ] knob is set to full
daylight activation .
Adjust the [ LUX ] knob.
When the [ LUX ] setting is set
to , the detection distance
is shortened.
Interference from sunlight.
Re-test at night.
Cleaning
Wipe the PIR sensor’s diffuser with a damp cloth a few times a year. Never remove the PIR
sensor housing. This may cause damage and invalidate the guarantee.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that the material can be disposed
of in a responsible manner. When recycling your product, take it to your local
collection facility or contact the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
Summary of Contents for 36-6504
Page 2: ......