6
EN
G
LIS
H
Settings
Duration time [ TIME ]
The length of time the light remains on can be set from 15 sec. to approx. 10 minutes (adjustable).
Adjust the duration time by turning the [ TIME ] knob t or – respectively.
Note:
Every new detected movement resets the duration time.
Activation light level [ LUX ]
The sensor has a photocell which detects various degrees of light and darkness. Adjust
the activation light level by turning the [ LUX ] knob between and . Use to adjust the dawn-
to-dusk sensitivity level for turning the light on at dawn and the dusk-to-dawn sensitivity level
for turning the light off at dusk.
PIR sensor
1. Set the [ LUX ] knob to
and allow the PIR sensor to calibrate for 30 sec. Make sure that
the [ TIME ] knob is set to its minimum setting (-). The floodlight will now come on for 5 seconds
(this will occur within 1 minute).
2. Aim the sensor towards the desired detection zone.
3. Have someone move across the detection zone. Adjust the PIR sensor’s aim so that it
triggers the light to come on by the person moving across the detection zone.
4. Adjust the light - on time as desired by setting the [ TIME ] knob.
5. Setting the Lux level for desired light activation: Turn the [ LUX ] knob from
to ‚ so that
the light is set to only activate while dark.
To set the light to come on at dusk: Wait until the light has dropped to the desired level.
Then slowly turn the [ LUX ] knob towards the Sun symbol ,whilst having someone slowly walk
across the detection zone. Keep turning the knob until light comes on and leave it at that setting.
Note:
This procedure may need to be repeated several times before the correct setting is found.
Summary of Contents for 36-6504
Page 2: ......
