2
½
" deck screws - 10
OUTDOOR CHAIR ASSEMBLY
(continued)
7.1
Begin installation of the Back Slats (10) at the top of the back.
7.2
Position the first slat so the top edge projects 1/2" above the top of
the Back Rail and secure it with 2
½
" Deck Screws.
7.3
Using 1/8" thick spacers, to maintain a consistent gap between slats,
install the remaining Back Slats.
•
Position the Armrest (11) as shown and secure it with 2½" Deck Screws.
STEP 7.
INSTALL THE BACK SLATS
STEP 8.
INSTALL THE ARM RESTS
6
2
½
" deck screws - 17
In addition
to the Terms of Use found at www.fcl.crs/contact-us/privacy-terms, you are responsible for any applicable code approval or permits associated with the construction and use of this plan. Check with a
building-code official or a building expert to make sure that the materials and construction methods shown meet local codes and conditions and are suitable to your situation. It is the responsibility of the builder
to ensure the proper tools, measurements, cuts and building techniques are used in the construction of this plan. CO-OP
®
assumes no responsibility for the incorrect use of this information. Please ensure the
manufacturer's instructions are followed in the use of all tools and materials and heed all recommended safety guidelines.
®CO-OP and design trademark are registered trademarks of Federated Co-operatives Limited, Saskatoon S7K 3M9
½"
