background image

7

7) Always try pedaling during riding on muddy or rough road.
8) During your start on the ramp-way for climbing, please first ride by pedaling, then start the

power switch for the e-motor assist.

9) During cleaning of your Mini, wipe with moist cloth or wet cloth, never using water hose or

squirt gun for the cleaning work.

10) Prohibit putting oil on the front brake shoes.
11) Big seat post

and middle seat post

should be cleaned, maybe put a little

sewing-machine oil for lubrication if necessary.

6: Battery Charger User Guide:

(the charger indicator: red means is charging , green means battery is full.
1) Be sure to fully charge the battery before the first use .
2) The charge time for the first initial 3 uses should be 12 hours.
3) The Li-ion battery can be stored with full charge. If you are not riding far distance, it’s not

necessary to charge the batteries frequently.

4) If your e-bike will be stored a long time without riding, you should take off the battery box, and

store it with 50% of its charge, and do re-charge fully every 3 months.

5) During the battery charging process, always keep the battery and the charger out of children

reach.

6) Do not try to disassemble or modify the battery charger.
7) The charger you got is only for li-ion battery use, and should not be used with any other

batteries.

8) Do not try to use this battery charger for charging other batteries, which are not supplied by us.
9) Battery balance charge can be shown at the indicator of the battery, which can be read once you

turn on the e-power switch key.

10) Charging the battery: first plug the connector between the charger and the battery, then plug the

charger to the power source, the LED on the charger will show red, that means the charger is on
/ working. When the LED becomes green, it means the battery is fully charged. When you
finished the charge, please first take off the charger’s plug from the power source, and then
depart the connector between the battery and the charger. Please do not work on the opposite
process.

11) During charging, the charger and the battery should be placed in a stable and cool place. The

working temperature for the battery ranges between 32 and 113ºF. The optimum working
temperature ranges between 68ºF and 77ºF. Do not place any cover on the battery or the
charger- while using.

Ensure that no liquids or metal filings diffuse into the charger; if the

battery box surface is found to be too hot (higher than 140F), during charging, that might suggest
a malfunction. The power should be cut off at once and the battery should be repaired in
appointed service station.

Summary of Contents for 12 inch Mini E-bike









Reviews: