Assembly Instructions
RVERSE XLR
TODDLER SEAT
MODEL # 125422
Adjusting Canopy
Pull the canopy cover forward or
push backward.
Inserting Mounting Adaptors
Insert mounting adaptors into
the seat attachment slots on the
stroller frame. Ensure the mounting
adaptors are positioned forward
as shown to the right.
Attaching Wheel Mud Guards
Insert the wheel mud guards into
the rear wheel housing slots until it
clicks into place
Attaching Toddler Seat
Insert the toddler seat into the
attachment slots located in the
bottom rear leg of the stroller.
Backrest Adjustment
1. To lift backrest; attach the
webbing buckle together.
2. To lower backrest; release the
webbing buckle by pressing
the sides of the buckle.
To Uncover Window
Roll window cover down and
attach toggle to toggle loop when
window is in use.
To Remove Toddler Seat
Press orange lever on top rear of
the toddler seat and lift to remove
toddler seat from stroller.
Attaching Canopy
1. Attach canopy to the seat
frame, ensuring side clips
are attached securely on
the seat frame.
2. Attach press studs of the
rear of canopy together.
Restraints - Harness
1. To secure the child in the harness, place left hand buckle prong (b) on top of (a).
2. Hold both left hand buckle prongs (a) and (b) together and insert it into buckle
housing (e) until it snaps into position.
3. Repeat previous steps for right hand buckle prongs (c) and (d).
4. Once all attached, carefully adjust the harness straps by pulling each slider (f) until
the desired fit is achieved in the lap, shoulder and crotch straps.
5. To release the buckles, squeeze the top and bottom prongs (a) and (b), (c) and (d)
together until harness disengages.
CAUTION:
Always adjust the harness when changing the seating position of the child.
f
f
f
f
f
a
b
c
d
e
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
