5
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Chair Backrest...
The rocking chair is now ready for use.
1
4
2
3
Lay chair with rocking base attached (pre-assembled)
face down on a flat surface.
Stand chair upright.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the chair and rocker is
assembled.
Identify all parts and components.
Two people are recommended for assembly of the chair.
Spread a sheet on the floor during assembly time to protect the chair.
Carefully slide backrest into position.
Insert 1x 45mm bolt and washer into the center
of the rear base and tighten.
Insert 1 x 45mm bolt and washer into the side of
the backrest.
Repeat on other side.
Lower flap and secure Velcro along base of the
chair.
1a.
4a.
a.
b.
c.
d.
e.
2a.
2b.
3a.
3b.
3c.
WARNING!
DO NOT over-tighten bolts.
