4
. The Profile Settings screen has drop-down menu to select the encryption type. If you enable
encryption function, Select the encryption type and Authentication Mode. Click the “
Next
”
button to
continue or the “
Back
”
button to return to the previous screen. If you disable Encryption, go to
Step 6.
Encryption (Off/64 bits /128 bits)
- If you do not want to use WEP encryption, choose
Off
. To use
WEP encryption (recommended to increase network security), select
64 bits
or
128 bits
from the
drop-down menu, and select Authentication Mode, Open System/ Shared Key.
5
. Select which Input Method you want to use. It supports three modes: Alphanumeric/
Hexadecimal/Passphrase. Enter your encryption key.
Key 1
- This WEP key must match the WEP key of your wireless network. If you are using 64-bit WEP
encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit
WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal
characters are “0” to “9” and “A” to “F”.
