(B) Peer to Peer
- This mode allows wireless-equipped computers to communicate directly with
each other. No access point is used.
Transfer Rate:
Select the speed you want to use in the drop-down manual of the Transfer Rate
3
. The Profile Settings
screen will appear now after filling in the information. If you choose “
Access
Point Mode
”, go to
Step 4
now. If you choose “
Peer to Peer
” Mode, select the correct settings as in
the below page. Click the “
Next
”
button, and go to next page. Click the “
Back
”
button if you need to
change any settings.
Network Name
- Fill the SSID of the wireless network
Transfer Rate-
Select the speed you want to use in the drop-down manual of the Transfer Rate
Channel
- The channel you choose should match the channel set on the other devices in your wireless
network.