2 Configuring this Wireless Assess Point
In this chapter, it describes how to use the web management, a web browser-based utility that
allows you to remotely configure and manage this Wireless Access Point.
This Wireless Access Point’s
default IP address
is
192.168.1.253
, you must set a PC’s IP
address in the same domain (e.g. IP:192.168.1.1, subnet mask: 255.255.255.0) and connect
this PC to the Wireless Access Point.
Open your Web browser and type the IP address
http://192.168.1.253
and press
<ENTER>
.
Enter the User name and Password when prompted, the
default User name
is “
root
”, and the
default Password
is “
1234
”.
2.1 Setup Wizard
After successfully accessing to the configuration web page, the setup status will be shown as
in the figure below.
