User’s Manual
Page 3
1.0
OVERVIEW
This board interface is used for the connection between AcornSix 6-axis CNC
controller and the CLEARPATH SERVO DRIVE.
2.0
FEATURES
•
Enable and disable the drives.
•
Splits Step and Direction signals from axis X or Y to allow wiring an
additional axis using the same signals.
•
The board can be activated and start monitoring for a driver fault using the
axis enable or NO_FAULT signal.
•
Electromechanical relay reflects the ACTIVE / FAULT Status of a servo.
•
Power terminal (24VDC).
•
Status LEDs for fault axis and relay status.
•
Connector CONMOLEX 8P for driver CLEARPATH.
•
Pluggable Screw-On Terminals
