CNC CNCWL- 5136-XN, Operator'S Manual

Page: 15 / 30

CNCWL-XN Series Machines
Machine Communications
USB Ports and USB Cable
The first method allows the computer to communicate directly to the machine.
In Figure 5a the USB port pass through is shown, which can be found behind the latchdoor located on the
back of the machine at the bottom.
This type of cable is called either a “printer” cable or “A-Male to B-Male” cable. This blue cable will connect
from the laser as shown in Figure 5a and go through the passthrough which will then allow your cable to be
plugged in toyour computers USBport while the latch door isclosed, and your electrical components are
protected.
The second method will allow you to use a USB Memory Stick/Flash Drive to transfer files to the machine.
The USB port is located on the Top or Right side of the machine. This USB port allows the machine to read a
.rd file (RD Works) from the USB/Flash Drive. When using this port, press the “File” button on the display
panel then select “Udisk”. Next, select “Read Mem File”, lastly, select the file and “Copy to memory”.
CNC Warehouse LLC 11