Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 57
Support: +49 (0)2831/91021-50
31.03.2014
7 . 6
A c t i v i t i e s a f t e r u s e
Personnel:
•
Operator
Safety equipment:
•
protective clothing
•
Safety shoes
•
protective gloves
1.
Turning off the machine.
ATTENTION:
Risk of injury by chips!
Chips can be sharp and cause deep lacerations.
•
Always wear protective gloves when removing chips.
2.
Clean the machine (see chapter 8.4.1).
7 . 7
E m e r g e n c y S h u t d o w n
In hazardous situations, movements of components must be stopped as soon as possible and the
power supply must be switched off.
Stopping in an emergency
1
Immediately activate emergency stop by emergency stop device.
2
If there is no danger for your health, remove persons from the danger zone.
3
If necessary, initiate first aid measures.
4
Call Fire department and / or ambulance service.
5
Inform the responsible person on site.
6
Turn the machine off and secure it against being switched on again.
7
Keep access routes for emergency vehicles free.
8
Instruct rescue vehicles.
