Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 13
Support: +49 (0)2831/91021-50
31.03.2014
2 . 2 . 3
Dangers by high or ve ry low te mperatures
Hot surfaces
ATTENTIONS:
Risks by hot surfaces!
Tools, work pieces and chips can heat up during operation. Skin contact with hot
surfaces causes serious burns of the skin.
•
As a matter of principle, for all tasks with tools, work pieces and chips,
protective clothing and gloves must be worn.
•
Before all tasks, make sure that all surfaces have cooled down to the
ambient temperature.
2 . 2 . 4
Ris k o f fire
Highly flammable materials
ATTENTION:
Risk of fire by highly flammable materials!
Organic dust produced by coal or wood or inorganic dust from magnesium,
aluminium, zinc or titanium can catch fire and cause severe injuries and death.
•
Do not smoke within the danger zone and the immediate vicinity. Refrain
from contact with open flames or sources of ignition.
•
Keep a fire extinguisher at hand in the immediate vicinity of the work area.
•
Do not process light alloys such as magnesium, aluminium, zinc and
titanium without an extraction system and relevant security measures.
•
Suspend any work activities in case of fire. Leave the danger zone until the
all clear signal is given
