User Manual
CNC Wireless Keypad
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 7
Support: +49 (0)2831/91021-50
12.11.2013
4
Possible errors CNC wireless keypads:
Ensure that the numeric keypad of the used processor unit (including laptops without existing
numeric keypad) is activated before usage.
If this is not the case, this could lead to a signal-error and cause faulty performance of the remote
control.
Possible settings or computer remedy (PCs) could be:
Activate the numeric keypad via Bios, if this is admitted (administration skills necessary)! The issue
in BIOS is called:
“Boot up NumLock”.
Or a Laptop or keyboard for example, has the possibility to activate the control-keys
FN and NUM
.
Using regular keyboards please activate the key in the numeric keypad
NUM
and then install FB.
The third possible way would be by using Reg Edit on the operating system:
Start the registration-editor by pressing [Windows-[R] and enter
“regedit”
.
In the registration-editor, please switch into following folder:
“HKEY_CURRENT_USER\Control Panel\Keyboard”
Please double-click in the right half window on
“InitialKeyboardIndicators”.
Please enter the value
“2”
in following window, and close the registration-editor.
That’s it! The NUM-function of the numeric keypad is now automatically activated for the next
start. If you want to deactivate this function permanently, please use value
“0”.
By using other values you can also set start-combinations from different special keys.
Following values are possible:
0 – deactivate all functions
1 – activate Caps Lock
2 – activate NUM
3 – activate Caps Lock and NUM
4 – activate Scroll
5 – activate Caps Lock and Scroll
6 – activate NUM and Scroll
7 – activate all functions
