Standard 4' x 8' CNC Machine Kit
READ THE FOLLOWING PRIOR TO BEGINNING THE
ASSEMBLY OF YOUR MACHINE
1. The machine assembly is broken down into different sections, visible in the navigation pane on the left. The Table of
Contents on the right will show the steps within each section.
2. It is helpful to look through each section prior to beginning its assembly.
3. Each section begins with an image of the fully assembled component. If needed, refer to this as a reference frame while
completing individual assembly steps.
4. Each section will identify the parts and tools needed for those assembly steps. Identification of fasteners is easier if they
are kept in their respective fastener bags.
5. Assembling the larger components, such as the base and optional leg kit, is made easier with two people. Though not
required, this can make the process more efficient.
6. Listed below are two types of Notes you will see through the assembly instructions:
Throughout the assembly of your machine, you will use both T-Studs and Roll-in T-Nuts. Review the following instructions
for proper use of these components.
Section Note
Section Notes are used to denote when the section is configuration specific
(ex: NEMA 23 vs NEMA 34 electronics).
Assembly Note
Assembly Notes are used to call attention to certain parts of the assembly step. Pay attention to these as they provide
important information for a successful machine build.
CRP4896
Assembly Instructions
Version 2018Q3.3
© 2018 CNC Router Parts LLC
All Rights Reserved
