UHF-300 Wireless Conference System
18
the channel by
VOL -
and
VOL +
key, and press
MUTE
to save the setting,
Microphone will switch to next setting part automatically. User can see receiver data
channel setting for reference.
Microphone ID setting: Chairman microphone ID number can be set from 0-9, A-F
total 16 ID for option, delegate microphone ID number can be set from 0-255, total
156 ID for option. User can select the ID by
VOL -
and
VOL +
key, and press
MUTE
to save the setting, Microphone will switch to next setting part automatically.
Please note: All microphone ID in one system should be different, if any units have
the same ID number, the system will not work properly. If system connect video
processor to support video camera auto-track function, chairman microphone ID
should be 1.
Chime of chairman microphone: When chairman microphone turned on, system will
give a chime indicative sound. User can press
VOL -
to close this function and press
VOL +
to open this function.
Microphone working mode: Default mode is LINK. User can press
VOL -
switch to
FREE mode and press
VOL +
switch to LINK mode. In Free mode, microphone can be
tuned on/off any time with communicate with receiver unit, and user can set the
microphone audio channel (when microphone is off, press
MUTE
key, audio channel
number will flash, user can press
VOL -
and
VOL +
key to select the audio channel),
FREE mode just used for testing. In LINK mode, microphone must work and
communicate with receiver unit, or microphone can not turn on, microphone audio
channel was distributed by receiver unit.
Exit microphone project setting: Press microphone on or POWER key to exit, if there
is no action of the microphone microphone will exit the setting in 9 secs.
2.5.3.USB RECORDING MODULE
USB recording module menu include 5 sub-menu
Operation method:
•
Press “ / ” to select the sub-menu.
•
Press “ ” to enter the sub-menu.
•
Press “ ” to exit current menu and back to previous menu.
•
Hold and press “ ” 3 seconds back to the main menu
①
Music: The device will play the audio file (mp3 format) automatically when USB
flash disk connected USB interface, and user can select the audio file by press
key “ / ”
