UHF-300 Wireless Conference System
16
Chairman microphone audio channel
Manual setting: Press
SET
key one or several times till “
40
” character flashing,
press
DOWN
or
UP
key to select the channel, and then press
SET
to save it or
wait about 3 seconds the system will save the setting automatically, characters
will stop flashing
Auto-scan setting: Press
SET
key one or several times till “
40
” character flashing,
and then press and hold the
SET
key till LCD display symbol
---
, release the key,
system will scan all audio channel (00-99) automatically and select the best one
to save it.
Chairman microphone audio description: Bandwidth of chairman microphone is
25M; default setting is 610.00MHz -- 634.75MHz (Please contact us or agent to
get more information if user want choose other frequency for chairman
microphone). There are 100 channels for option in this bandwidth, frequency
interval is 250 KHz.
Delegate microphone (D1, D2, D3, D4) audio channel
Channel setting method: please see chairman microphone audio channel setting
method.
Delegate microphone audio description: Bandwidth of delegate microphone is
25M, default setting is 640.00MHz -- 664.75MHz (Please contact us or agent to
get more information if user want choose other frequency for delegate
microphone). There are 100 channels for option in this bandwidth, frequency
interval is 250 KHz.
Please note there are 4 audio channel of the delegate microphone in the system,
so the channel number can not be same.
d.
System project setting
Press
SET
key and turn on the receiver with
POWER
key at the same time, receiver LCD
will display , there are 4 setting menu in this part.
Receiver data (room) channel setting (Default channel is "
ROOM 1
"), there are 16
data (room) channel for option (0-1-2-3-4-5-6-7-8-9-A-B-C-D-E-F), user can select
the channel by
UP
and
DOWN
key, and press
SET
to save the setting, receiver will
switch to next setting part automatically. This system use room number to show the
data control channel, if there are more than 1 system used in the same place or
building, we suggest user to set different room number (data channel) in order to
avoid interface. If other equipments has same frequency of the data channel, use also
can change it.
Delegate microphone audio channel: the receiver will switch to delegate microphone
audio channel setting automatically after user save the setting of receiver data
channel.
0---Audio channel not available, 1---Audio channel not available.
Setting method of Channel 1: Press
DOWN
key to close this channel and press
UP
key to open this channel, press
SET
key to save the setting and receiver will
switch to next setting part automatically.
Setting method of channel 2, 3, 4: Please see the setting of channel 1.
Description of this setting: Receiver use 4 channel LNB to support 4 delegate
