5
3. Plumbing
Make appropriate water tight connections on both the inlet and outlet
of the DEL UV Spa. Water flow may be in either direction.
Temporarily apply power to the spa and start the spa circulation
system to check for and repair any water leaks. Disconnect power to
the spa.
1. Overview
Achieve The Complete Modern Spa® by choosing sanitizing
components that work together, creating the best possible installation.
The DEL UV
®
Spa is a UV sanitizer designed for use in portable spas
and to be controlled by the spa’s equipment pack. Please contact
customer support if the DEL UV
®
Spa is used in an application other
than a portable spa.
2. Mounting
a. Use the two mounting holes located internally on the back panel of
the DEL UV Spa (Figure 1).
b. Mount the DEL UV Spa to the spa frame with #8 hardware. The
preferred mounting orientation is shown in Figure 2. Connect water
inlet at the bottom. Contact customer support for other installation
options.
Mounting Holes
Water Outlet
Bonding Lugs
Allow Vertical Clearance
for Lamp Removal
(approx. 12”)
Water Intlet
Water Return to Spa
Water from Spa
Isolation Valve
(Recommended)
Isolation Valve
(Recommended)
SECTION 1 Installation Instructions
Figure 2: DEL UV® Spa Plumbing Diagram
